53601-SLJ-023 HONDA STEP WGN RG1RG3 RHD Hydraulic Power Steering gear

53601-SLJ-023 HONDA STEP WGN RG1\RG3 RHD Hydraulic Power Steering gear is a core component of the original steering system for Honda HONDA STEP WGN RG1 and RG3 models. This product is dedicated to right-hand drive models (RHD, Right-Hand Drive), that is, it is suitable for models with the driver's seat on the right, such as the versions commonly seen in markets such as Japan, the United Kingdom, and Hong Kong.

As a hydraulic power steering gear, its main function is to assist the driver to easily and accurately control the direction of the vehicle, improve the flexibility and safety of steering, especially in conditions such as low-speed driving, parking or turning, which significantly improves the control experience.

STEP WGN steering gear Applicable models

This product is designed for the following Honda models:

● Model name: Honda Stepwgn (also known as Step Wagon)

● Model code: RG1 / RG3

● Year of production: about 2005 to 2009

● Drive mode: common to two-wheel drive (RG1) and four-wheel drive (RG3) versions

● Steering wheel position: right side (RHD)

Product structure and technical parameters

STEP WGN steering gear is one of the key components of the entire steering system and is a precision hydraulic control mechanism. Its basic structure and main technical parameters are as follows:

1. Product OE number: 53601-SLJ-023

● This is the number of Honda's original accessories, which can be used to check whether it is an original or compatible part for the corresponding model.

2. Product type: Hydraulic Power Steering Rack

● Compared with electronic power steering (EPS) or mechanical steering mechanisms, this product relies on an engine-driven hydraulic pump to provide hydraulic oil to provide additional power when steering.

3. Installation location: Horizontally installed at the lower part of the front axle

● Connect the steering wheel, steering column and front wheels to achieve direction control and power transmission.

4. Core components:

● Steering rack (Rack) and pinion (Pinion)

● Power cylinder and hydraulic valve body

● Oil seal and dust cover

● Tie Rod Ends on both sides

5. Power mode: hydraulic control

● The hydraulic pump delivers hydraulic oil to the steering gear through a high-pressure oil pipe, and the internal power cylinder assists the drive when rotating, making steering easier.

6. Steering stroke: about 140mm-160mm

7. Input shaft angle: consistent with the original car, ensuring perfect connection with the steering column

8. Symmetry of left and right feedback force: meet the original design standards, maintain good return to neutrality and balance

9. Sealing performance: use highly wear-resistant imported oil seals, high pressure resistance, corrosion resistance, and prevent hydraulic oil leakage

10. Surface treatment: galvanized anti-rust or electrophoresis treatment to ensure corrosion resistance life of more than 5 years

HONDA steering gear applicable scenarios and users

● Users with original car steering gears that have oil leakage, abnormal noise, excessive gap, heavy steering, etc.

● Steering system maintenance and refurbishment of high-mileage vehicles

● Second-hand car refurbishment and repair service providers, auto repair shops, auto parts dealers

● Repair demand for Honda model steering parts in the right-hand drive market (such as Japan, the United Kingdom, and Southeast Asia)

Factory Show